Visual representation of different types of services that may be included within Managed IT

How to Evaluate Managed IT Services Pricing Models in Australia

Evaluate managed IT services pricing on the total cost of a clearly defined scope, not the headline monthly rate. Give every provider the same picture of your environment. Then compare what each fee includes and excludes, the response targets and the hours they apply to, the security controls covered, and the contract and exit terms. The cheapest quote is often the one with the most left out.

This guide sets out what to ask and what to pay attention to at each step. It is written for IT managers at Australian mid-market organisations of roughly 150 to 350 staff, comparing proposals from managed service providers.

Key takeaways

What pricing models will you see?

Most Australian managed service providers use one of four structures, or a mix of them.

Managed IT services pricing models in Australia and what to check in each
ModelHow it worksPay attention to
Per user, per monthA fixed fee for each supported userHow shared devices, servers and contractors are counted, and any minimum user number
Per device, per monthA fee for each managed endpoint, server or network deviceWhether servers and network equipment are priced differently from laptops
Fixed fee for an agreed scopeOne monthly fee set from a documented scope of workWhether the scope is written in enough detail to test what is in and what is out
HybridA mix of user, device and infrastructure chargesWhether the parts overlap, so you are not paying twice for the same work

No model is better in every case. Per-user pricing is simple when support needs track headcount. Per-device pricing can suit environments with shared workstations or a lot of equipment. A scoped fixed fee fits environments where servers, platforms and security requirements drive the work more than user numbers do.

If you already employ IT staff, you may also be quoted for a co-managed arrangement, where the provider takes a defined part of the work. We compare that option in should a 250-person company outsource IT or keep it in-house?

Why should every provider quote the same scope?

Two quotes built on different assumptions cannot be compared, however similar the monthly figure looks.

Ask every provider to quote against the same information:

  • users, devices, servers and sites
  • applications, cloud platforms and Microsoft 365 setup
  • support hours you need and any after-hours requirements
  • security and compliance obligations, including any Essential Eight maturity target
  • backup, recovery and retention requirements

Pay attention to providers who quote without a discovery session. A figure produced before anyone has looked at your environment is an estimate of an average client, not of you. Expect the scope to be confirmed in writing before you sign.

What does the monthly fee actually cover?

The fee is only as useful as the list behind it. Ask for a written schedule of inclusions, then ask what sits outside it.

Ask:

  • Is service desk support included, and during which hours?
  • Which systems are monitored, and is monitoring 24/7?
  • Does patching cover operating systems only, or third-party applications and firmware too?
  • Are backup, restore testing and recovery included?
  • Is vendor management included, and for which vendors?
  • Are regular IT planning or service reviews included, and how often?

Pay attention to the common exclusions: on-site visits, after-hours response, projects and major changes, onboarding and transition, hardware procurement, and licences passed through at cost. None of these is unreasonable to charge for. The problem is finding out after you sign.

How the fee is structured matters as much as what it lists. We have written separately about what your managed services retainer actually buys, including how to tell a fee that buys delivered work from one that buys availability.

How should you compare response targets and support hours?

Response targets are one of the easiest things to compare and one of the easiest to misread.

Ask:

  • What are the response and resolution targets for each priority level?
  • Which hours do those targets apply to?
  • What happens to a critical issue raised at 2am or on a Sunday?
  • Are after-hours or extended-hours service levels available, and what do they change?
  • What reporting shows whether targets were met?

Pay attention to the difference between response and resolution. A 15-minute response means someone has picked up the issue, not that it is fixed. Also check whether targets run around the clock or only in business hours. Many agreements cover business hours only, with extended or after-hours response as a separate service level.

For example, Evolution Systems’ Managed Services Service Schedule targets a 15-minute response and 2-hour resolution for Priority 1 issues, and a 30-minute response and 4-hour resolution for Priority 2. Our service desk operates during business hours, and monitoring runs 24/7 for managed services and private cloud customers. Under the standard agreement, a Priority 1 or 2 alert outside business hours is picked up at 9am the next business day. Our Extended Business Hours (7am to 7pm weekdays) and After Hours (24/7) service levels extend live response. Whichever provider you choose, get this level of detail in writing.

How do security inclusions change the price?

Security is where quotes that look similar most often turn out to be different. ASD’s Annual Cyber Threat Report 2025–26 puts the average self-reported cost of cybercrime for a medium business at $141,300 per report, up 45% on the previous year. That is the risk the security line in a proposal is meant to cover.

Ask:

  • Which controls are in the managed services fee, and which are part of a separate managed security service?
  • Which Essential Eight maturity level or ASD Essentials priority phases does the service support, and how is that evidenced?
  • Is security monitoring 24/7, and who responds to an incident?
  • Are endpoint protection, MFA, email security and security awareness training included?
  • How does the provider protect its own privileged access to your systems?

Pay attention to proposals that list security tools without saying who monitors them or what happens when they raise an alert. A tool nobody watches is a cost, not a control.

Provider security matters too, because a managed service provider usually holds privileged access to your environment. The Australian Cyber Security Centre publishes guidance on managing the risks that come with managed service providers, and we have answered the ASD’s questions for managed service providers directly. Our managed security services are delivered across three levels aligned to Essential Eight Maturity Levels 1 to 3.

What does the move from the Essential Eight to ASD Essentials mean for pricing?

On 15 October 2026, ASD published ASD Essentials, which evolves and replaces the Essential Eight. The Essential Eight stays on ASD’s website for now, ASD has not set a formal transition date, and contracts that name an Essential Eight maturity level still apply. The bigger change is how security is assessed. ASD says previous maturity level ratings “do not automatically translate” into ratings under the new framework, and the focus moves from whether a control is in place to whether it can be shown to work. We cover the detail in ASD Essentials is here: what changes from the Essential Eight.

Ask:

  • Which Essential Eight maturity level does the service support today, and which ASD Essentials domains and priority phases does it cover?
  • How does the provider evidence that controls are working, not just deployed?
  • Is a gap analysis against ASD Essentials part of the scope, or quoted separately?
  • Will moving to the new framework change the scope or the fee?

Pay attention to any provider that says your Essential Eight maturity level carries straight across. ASD says it does not, so a gap analysis is still needed.

What contract terms affect the real cost?

The contract decides what the monthly figure is worth over time.

Ask:

  • How long is the term, and what is the notice period?
  • How are price increases set during the term?
  • Are there minimum users, devices or monthly spend?
  • What are the onboarding and transition costs?
  • How is out-of-scope work quoted and approved?
  • What exit assistance is included, and how are documentation, data and administrator credentials handed back?

Pay attention to exit terms most of all. A provider confident in its service will not make it hard to leave.

How do you work out what you will really pay?

Project the full 12 months for each proposal: the recurring fee, onboarding, licences not included, out-of-scope work you can reasonably expect, and any after-hours or extended-hours service level you need. Then compare those totals, not the monthly rate.

If you are also weighing an internal team against a provider, set the full annual cost of each side by side, not a salary against a fee. Our guide to outsourcing IT or keeping it in-house sets out what to include on each side.

Is backup and disaster recovery in the price?

Backup and recovery is often priced separately, which is fine as long as you know it is.

Ask:

  • Are backup and disaster recovery inside the managed services fee or quoted separately?
  • How often are restores tested, and do you receive the test evidence?
  • Who decides which systems are recovered first?

Pay attention to the difference between backups that report success and recovery that has been proven. We deliver Disaster Recovery as a Service and Evolution Data Resilience, our managed recovery service, for exactly that reason.

Questions to ask every managed IT provider

  1. What information do you need from us before you can quote?
  2. Will you run a discovery session and confirm the scope in writing?
  3. Which pricing model are you using, and what drives the number?
  4. What is included in the monthly fee, and what is quoted separately?
  5. What are your response and resolution targets by priority, and which hours do they apply to?
  6. What happens to a critical issue outside business hours?
  7. Which security controls are included, and who monitors them?
  8. Which Essential Eight maturity level or ASD Essentials priority phases do you support, and how do you evidence it?
  9. Are backup, restore testing and recovery included?
  10. How are price increases, out-of-scope work and contract changes handled?
  11. What does exit assistance include?
  12. Can we speak to clients of a similar size and complexity?

How does Evolution Systems price managed services?

We price managed services from discovery sessions and a confirmed scope of work, not a per-user rate card. The fee reflects what is in scope for your environment, and the response targets are set out in our Managed Services Service Schedule. Evolution Systems has been ISO 27001 certified since 2016, and our managed IT services are delivered under those certified processes. That is what Personalised IT means in practice: the scope is shaped around your environment, not a fixed package.

If you would like a proposal you can test against this checklist, request a managed IT quote.

FAQs

Is per-user pricing better than a fixed monthly fee?

Neither is better in every case. Per-user pricing is simple when support needs track headcount. A fixed fee for an agreed scope suits environments where servers, platforms and security requirements drive the work. What matters more is whether the scope is written down clearly enough to test what is in and what is out.

Why do managed IT quotes for the same organisation vary so much?

Usually because each provider has assumed a different scope. One quote may include after-hours response, security monitoring and backup testing, while another leaves them out. Give every provider the same inventory and requirements, and the quotes become comparable.

What is the difference between response time and resolution time?

Response time is how quickly the provider picks up an issue. Resolution time is how quickly it is fixed. A short response target on its own says little, so ask for both, by priority level, and check which hours they apply to.

Should cyber security be included in the managed IT services fee?

Either structure can work, as long as it is clear which controls are covered, who monitors them and who responds to an incident. Some providers include baseline controls in the managed services fee and offer deeper protection as a separate managed security service. Ask for both in writing so nothing falls between them.

What information should I give providers before asking for a quote?

User, device, server and site numbers, your main applications and cloud platforms, the support hours you need, your security and compliance obligations, and your backup and recovery requirements. The more complete the picture, the fewer surprises later.

What is the difference between managed IT services and break-fix support?

Break-fix support charges per incident after something goes wrong. Managed IT services cover ongoing monitoring, maintenance, support and security for a monthly fee, with the aim of preventing issues rather than only fixing them.

Let's see how we can personalise your IT

Evolution Systems is ISO 27001 Certified

Information Security ISO 27001 Certification